; DCO6000.inf
;
; Version 1.0, 2006/6/22
;
; INF File for DCO6000 Serial Driver
;
; (c) Copyright 2006 Dialogue Technology Corporation
;

[Version]
Signature="$Windows NT$"
Provider=%DIALOGUE%
ClassGUID={4D36E96F-E325-11CE-BFC1-08002BE10318}
Class=Mouse
DriverVer=02/13/2007,1.0.0.1018
CatalogFile.NTx86 = dco6kx86.cat
CatalogFile.NTAMD64 = dco6kx64.cat

[DestinationDirs]
DefaultDestDir   = 12

[Manufacturer]
%DIALOGUE%   = DIALOGUE.Mfg, NTx86, NTamd64

[DIALOGUE.Mfg]
%DIALOGUE.DeviceDesc0% = DCO6000, SERENUM\DCO6000

[DIALOGUE.Mfg.NTx86]
%DIALOGUE.DeviceDesc0% = DCO6000, SERENUM\DCO6000

[DIALOGUE.Mfg.NTamd64]
%DIALOGUE.DeviceDesc0% = DCO6000, SERENUM\DCO6000


;
; General installation section
;
[DCO6000]
AddReg=DCO6000.AddReg
CopyFiles=DCO6000.CopyFiles

[DCO6000.AddReg]
;HKLM,System\CurrentControlSet\Control\Class\{4D36E96F-E325-11CE-BFC1-08002BE10318},UpperFilters,0x00010008,xpm
HKCU,"Control Panel\Mouse",DoubleClickHeight,0x00000000,"25"
HKCU,"Control Panel\Mouse",DoubleClickWidth,0x00000000,"25"
HKCU,"Control Panel\Mouse",DoubleClickSpeed,0x00000000,"800"

;
; File sections
;
[DCO6000.CopyFiles]
DCO6000.sys
;xpm.sys

;
; Service Installation
;
[DCO6000.Services]
AddService = DCO6000, 0x00000002 , DCO6000_Service_Inst, DCO6000_EventLog_Inst
;AddService = xpm,,XpmService
; Install mouclass.sys from msmouse.inf
Include=msmouse.inf
Needs=MouClass.Services

[DCO6000_Service_Inst]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Pointer Port
ServiceBinary  = %12%\DCO6000.sys

;[XpmService]
;ServiceType = 1
;ErrorControl = 1
;StartType = 3
;ServiceBinary = %12%\xpm.sys

[DCO6000_EventLog_Inst]
AddReg = DCO6000_EventLog_AddReg

[DCO6000_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\DCO6000.sys"
HKR,,TypesSupported,0x00010001,7


;
; Source file information
;
[SourceDisksNames.x86]
1=%PenMountDisk%,,,\i386

[SourceDisksNames.amd64]
1=%PenMountDisk%,,,\amd64

[SourceDisksFiles]
DCO6000.sys = 1,,
;xpm.sys = 1,,

[Strings]
REG_SZ         = 0x00000000
REG_MULTI_SZ   = 0x00010000
REG_EXPAND_SZ  = 0x00020000
REG_BINARY     = 0x00000001
REG_DWORD      = 0x00010001
SERVICEROOT    = "System\CurrentControlSet\Services"

DIALOGUE.DeviceDesc0 = "PenMount 6000 RS232"
PenMountDisk = "Dialogue Technology Installation Disk #1 (DCO6000 Serial)"
DIALOGUE = "Dialogue Technology Corp."
