Lenovo Desktop
Lenovo ThinkStation
Windows 10 64bit
Windows 11
Windows 11 (23H2)
Windows 11 (24H2)
10.2.7.0
Serial IO
1
This package installs the software (PCI Device) to enable the following device.
Device name Device name in the Device Manager
------------------------------- ---------------------------------
PCI Device/PCI Multiport Serial Controller SUNIX multi-function card
Refer to marketing materials to find out what computer models support which devices.
This program is language independent and can be used with any language system.
Ver 10.2.7.0 - 2024/09/27
0) release version
1) fix serial port restore status logic
N/A
DRIVER FILES:
Setup.exe : SUNIX Multi-I/O Controller driver package file
SUNIX_Silent_Install : silent installation batch file
\INF Package
\Card Driver
snxpci.inf : SUNIX multi-function card driver INF file
snxpci.cat : SUNIX multi-function card driver catalog file
snxpcard.sys : SUNIX multi-function card 32bit driver file
snxpcamd.sys : SUNIX multi-function card 64bit driver file
snxprops.dll : SUNIX property sheet 32bit dll file
snxpramd.dll : SUNIX property sheet 64bit dll file
\Port Driver
snxpcip.inf : SUNIX serial/parallel port driver INF file
snxport.cat : SUNIX serial/parallel port driver catalog file
snxpserx.sys : SUNIX serial port 32bit driver file
snxpsamd.sys : SUNIX serial port 64bit driver file
snxppalx.sys : SUNIX parallel port 32bit driver file
snxppamd.sys : SUNIX parallel port 64bit driver file
snxprops.dll : SUNIX property sheet 32bit dll file
snxpramd.dll : SUNIX property sheet 64bit dll file
1. Hold down the Windows logo key and press X to open a menu at the lower-left
area of the screen.
2. Select Device Manager from the menu.
3. Double-click "other device", Double-click "PCI Device", "PCI Serial Port","PCI Parallel Port" or "PCI Multiport Serial Controller"(this name depends on the type of the IO card).
4. Select the Driver tab.
5. Check Driver Version.
1. Right-click Windows logo on taskbar.
2. Select System Information.
3. Check the version in the system specification.
Setup driver at first time:
using Setup.exe
Step 1. Run Setup.exe, click [Next/Install] to continue the procedure.
Step 2. Press [Finish] to complete the installation.
using INF
Step 1. Open Device Manager, find yellow marked "PCI Device", "PCI Serial Port",
"PCI Parallel Port" or "PCI Multiport Serial Controller"(this name depends
on the type of the IO card).
Step 2. Right click, and select [Update driver].
Step 3. On the update driver dialog, select "Browse my computer for drivers",
Step 4. Set INF folder location, select "card driver" and click [ok], [Next]
Step 5. After the card driver is installed successfully, close the update driver dialog.
Step 6. Find yellow marked "SUNIX COM Port x" or "SUNIX COM Port x".
Step 7. According to the port amount, repeat step 2~3.
Step 8. Set INF folder location, select "port driver" and click [ok],[Next]
Step 9. repeat step 6~8 finished other "SUNIX COM Port x" drive installation.
Update driver:
using Setup.exe
Step 1. Run Setup.exe, click [Next/Install] to continue the procedure.
Step 2. Press [Finish] to complete the installation.
using INF
Step 1. Open Device Manager, find yellow marked "PCI Device", "PCI Serial Port",
"PCI Parallel Port" or "PCI Multiport Serial Controller"(this name depends
on the type of the IO card).
Step 2. Right click, and select [Update driver].
Step 3. On the update driver dialog, select "Browse my computer for drivers",
Step 4. Set INF folder location, select "card driver" and click [ok], [Next]
Step 5. After the card driver is installed successfully, close the update driver dialog.
Step 6. Find yellow marked "SUNIX COM Port x" or "SUNIX COM Port x".
Step 7. According to the port amount, repeat step 2~3.
Step 8. Set INF folder location, select "port driver" and click [ok],[Next]
Step 9. repeat step 6~8 finished other "SUNIX COM Port x" drive installation.
Silent installation
Run "Setup.exe /s /f2<path\logfile name>"
i.e. Setup.exe /s /f2c:\logfiledir\logfile.log
using Setup.exe
Step 1. Open "control panel", "programs", "programs and features",select "SUNIX Multi-IO Controller",
and double click it to uninstall.
Step 2. Click on [Yes] to continue the procedure.
Step 3. Press [Finish] complete the uninstallation.
Step 4. Shutdown the system and remove hardware device to fully remove driver.
using INF
WARNING : NEVER USE THIS METHOD IF YOU HAVE USED SETUP.EXE TO INSTALL DRIVER!
IT WILL MAKE DRIVER BE UNINSTALLED UNCLEANLY AND MAKE SYSTEM FAIL!
Step 1. Open Device Manager, find "SUNIX COM Port (COMx)".
Step 2. Right click, and select [Uninstall Device].
Step 3. Check "Attempt to remove the driver for this device" if the checkbox exists.
Step 4. Click [Uninstall]. After the installation finishes, the device will be deleted in the list.
Step 5. According to the port amount, repeat step 2~4 to complete all ports uninstallation.
Step 6. Find "SUNIX x-Port Serial Card" (this name depends on the type of the IO card).
Step 7. Right click, and select [Uninstall Device].
Step 8. Check "Attempt to remove the driver for this device" if the checkbox exists.
Step 9. Click [Uninstall]. After the installation finishes, the device will be deleted in the list.
Step 10. Shutdown the system and remove hardware device to fully remove driver.
Silent uninstallation
Run "Setup.exe /s /uninst /f2<path\logfile name>"
i.e. Setup.exe /s /uninst /f2c:\logfiledir\logfile.log
The following versions have been released to date.
Version Build ID Rev. Issue Date
---------- --------- --- ----------
10.2.7.0 N1SER25US14 01 2024/09/27
Note: Revision number (Rev.) is for administrative purpose of this README
document and is not related to software version. There is no need to
upgrade this software when the revision number changes.
To check the version of software, refer to the Determining which version is installed section.
* Lenovo and IdeaCentre are registered trademarks of Lenovo.
* Microsoft, Internet Explorer and Windows are registered trademarks of Microsoft Corporation.
Other company, product, and service names may be registered trademarks, trademarks or service marks of others